MyLocoSound – Diesel generates up to one watt of synthesised sound which is highly adjustable to represent a variety of diesel locos, from small railcars and industrial locos up to heavy, mainline freight units.
Adjustment is easy; you just need a small screwdriver to adjust the controls shown :
Once it has been installed and connected, the MyLocoSound – Diesel sound card can be adjusted to provide the sound characteristics required for each loco. Adjustments are made by using a 2-4mm flat bladed screwdriver to turn the trimpots located down one side of the sound card, as shown above.
The bell is for American locos and will ring while the motor or track voltage is in the range 4 to 8 volts. If you do not require a bell then remove the bell jumper link.
