[./pages/mylocosoundhome.html]
[./soundcard.html]
[./steamcard.html]
[./trackpower.html]
[./manualcontrol.html]
[./radiocontrol.html]
[./speakers.html]
[./purchaseuk.html]
[./purchaseoz.html]
[./purchaseelse.html]
[./purchasegsm.html]
[mailto:sales@mylocosound.com]
[Web Creator] [LMSOFT]
RCS Radio Control Equipment
MyLocoSound 
There are two types of RCS controller which can be used with the sound card, the choice depending largely on the voltage available in the loco.
RCS Basic
RCS Elite
Voltage Range
7 to 18 volts
Low 30 to 75 va power
12 to 24 volts
High 45 to 130 va power
Sound Card Connections
Requires Basic-SW accessory card
All required connections built in
Type of Controller
RCS TX-24
RCS Evolution
Type of System
Type of Transmitter
Proprietary, handheld RCS Transmitter

Choice of 3 frequencies

Pushbutton controls

Available only from RCS
Any brand of AM digitally proportional transmitter

Many frequency crystals

Joystick controls

Available from model aircraft and model car stores, etc.
  
  
  
Left joystick up for forward acceleration and down for backward acceleration

Right joystick right for horn or whistle.

Right joystick left for cab lights, etc.
Top row of buttons for speed, stop and change of direction

Lower left button for horn or whistle.

Lower second button for cab lights, uncoupler, etc.

Lower right buttons can be used to switch locos on the same frequency.
Suggested Configuration

(see RCS Instructions)
There are also two types of transmitter and receiver which can be used with RCS controllers as shown overleaf.